Samsung M32 5G SM-M326B Dead Boot Repair Firmware (USB Method)

 Is your Samsung M32 5G (SM-M326B) stuck on the logo, dead after a flash, or bricked after a downgrade? Don't worry — you can now easily revive your device without expensive tools like UFI or Easy Jtag. We are providing the Dead Boot Repair Scatter Firmware completely free, and you can flash it via USB with simple tools.

Samsung M32 5G SM-M326B Specs

This Firmware Repair Can Fix

Using the provided scatter firmware, you can solve:

-Dead boot recovery (Phone not powering on)

-Hang on Samsung logo (Bootloop)

-FRP lock removal (Factory Reset Protection)

-Fastboot mode stuck

-Blank or black screen issues

-Soft brick recovery

-IMEI repair / DRK fix

-Touch not working after flash

-System partition bugs and malfunctions

-General software-related issues

This file brings your device back to official stock ROM conditions, fully restoring functional.

This is USB Method No need for UFI Box, Easy Jtag, or any Dump file

Easy to use, even for beginners

Completely free – no hidden costs

Official stock scatter format firmware

Works for all major software issues

Even if your phone is completely dead after a failed downgrade or wrong firmware flash, this method can bring it back to life!

How to Flash Samsung M32 5G SM-M326B Dead Boot Firmware

-Download and extract the zip file (link below).

-Install the latest MTK USB Drivers on your PC.

-Open the flashing tool (like SP Flash Tool).

-Load the scatter file from the extracted folder.

-Connect your device via USB while holding Volume Up or Volume Down (depending on the model's detection mode).

-Click Download and wait until flashing is completed.

-Disconnect and reboot your phone.

-Your Samsung M32 5G should now be fully working again!

Download Link:

✅ Samsung M32 5G SM-M326B Dead Boot Repair File